Alloy compatibilizers – MAH‑type, GMA‑type and acrylic‑acid grafted types from Jiuju Polymer

解决方案

联系我们

邮箱：18918629916@189.cn
电话：+86 21 5187 9660
地址：Room 1505, North Building, No. 1839, Qixin Road, Minhang District, Shanghai 在线咨询

首页>Solutions>Polymer Alloys

Polymer Alloys

What is the difference between toughening agents and plastic···

In the field of polymer material processing, toughening agents and plasticizers are two types of additives that are frequently confused. They have similar names and seemingly simil···...
时间：2026-06-29 浏览量：2
Application and Market Status of Hot Melt Adhesives in Alumi···

Aluminum-plastic composite pipe is a new type of pipe that combines the advantages of both metal and plastic. Its typical structure consists of an inner and outer layer of polyethy···...
时间：2026-06-29 浏览量：2
Technical Analysis of Core Additives for Rubber-Plastic Co-m···

Introduction: Technical Thresholds of Co-modification Modification and the Core Value of AdditivesIn the rubber and plastics industry, cable materials, engineering plastics, polyme···...
时间：2026-06-15 浏览量：8
Resolving the Core Challenge in High-Value Recycling of Mixe···

Driven by the "dual carbon" goals and policies promoting a circular plastics economy, physical recycling of post-consumer plastics has become one of the most growth-certa···...
时间：2026-06-08 浏览量：7
PA/PBT Alloy: Solutions for Interfacial Incompatibility, Sel···

IntroductionThe logic behind engineering plastics application is shifting from pursuing single-property extremes to seeking a balanced combination of comprehensive properties. In h···...
时间：2026-06-01 浏览量：12
The Truth About Grafting Ratio of Compatibilizers – Meaning···

On the technical data sheet of compatibilizers, grafting ratio is often listed as the primary indicator. When customers inquire, the most frequent question is “What is your grafti···...
时间：2026-05-18 浏览量：18
Dynamic Covalent Compatibilizers – Technological Leap from ···

Looking back at the development of compatibilizer technology, three key leaps can be clearly identified: from physical compatibilization to reactive compatibilization, the interfac···...
时间：2026-05-14 浏览量：18
Design and Application of PA/PPO Alloy Compatibilizers

As a class of high-performance engineering plastics, PA/PPO (nylon/polyphenylene oxide) alloys successfully combine nylon’s excellent chemical resistance, high strength, and fatig···...
时间：2026-04-30 浏览量：24

<< 1 2 3 4 >> 1/4

解决方案

推荐产品

联系我们

Polymer Alloys

What is the difference between toughening agents and plastic···

Application and Market Status of Hot Melt Adhesives in Alumi···

Technical Analysis of Core Additives for Rubber-Plastic Co-m···

Resolving the Core Challenge in High-Value Recycling of Mixe···

PA/PBT Alloy: Solutions for Interfacial Incompatibility, Sel···

The Truth About Grafting Ratio of Compatibilizers – Meaning···

Dynamic Covalent Compatibilizers – Technological Leap from ···

Design and Application of PA/PPO Alloy Compatibilizers

微信号：+86 189 1862 9916微信二维码